Categories
Crafts
I’ve been intrigued by Mod Podge for a long time. I’ve had a brand new bottle sitting in the craft cabinet for at least a year, but just haven’t had the occasion to break it out.
A few months ago, my sister gave me a 3-deep drawer storage bin thing to use to organize some of my random craft stuff. It sat in the garage for a while before I ever got around to digging through the pile of stuff stacked in a corner of my family room. Buried deep in the pile was a wooden letter I bought at Michael’s a long time ago. I’m not sure what I ever really intended to do with it, so it got filed away in one of the drawers with many other forgotten crafty pieces.
Thursday was a very long day at work. Both kids were sick with strep throat. The chaos ensued and I needed a break, so I was looking for something to do. That's when I heard the Mod Podge calling my name...
It was a pretty easy project, a little time-consuming (due to drying) and a little messy (but cleans up easily with water). Here's how I did it:
Step 1: Tracing and Cutting
I started by tracing the letter on a sheet of scrapbooking paper, making sure to trace it from the front to the back to avoid any pencil lines on the front. Using an X-Acto knife, I carefully cut it out.
Step 2: Attaching the Edges
Next, I cut strips of the paper the same width as the letter. With a little Mod Podge on my brush, I painted over the edge of the letter and attached the strips, making sure they were straight and without air bubbles. I overlapped the strips slightly at the end for better coverage and added a thin layer of Mod Podge on top.
Step 3: Adding the Design
Once the edges were covered and everything dried, I added a thin layer of Mod Podge over the front of the letter and carefully placed the cut-out I traced earlier. Following the same process as before, I applied Mod Podge, added the paper, and repeated the process.
Finally, I added one more layer of Mod Podge to smooth out the surface. The project was complete, and I'm really happy with the final result. I plan to hang it beside my desk so I can admire it every day.
Creating a beautiful wreath for your front door doesn't have to be time-consuming or expensive. With just a few supplies and a little bit of creativity, you can make a personalized wreath in just 10 minutes. Mod Podge is a versatile crafting tool that can be used in various projects, and this DIY wreath is a great example of its potential. Give it a try and add a touch of charm to your front door!
Share this:
This article was written by [Author Name] for [Website Name].
At [Website Name], we believe that crafting is a wonderful way to express your creativity and add a personal touch to your home decor.
Looking for more DIY inspiration? Check out our other craft articles and tutorials.
Please note that this article does not contain any contact information such as addresses, emails, or phone numbers.
Miami
Punta Cana
Las Vegas
Raleigh
Austin
Providence
Cancun
- Fiesta Americana Condesa Cancún All Inclusive
- Cancun All Inclusive Resorts
- Cancun All Inclusive Resorts
- Best Beach Resorts In Cancun